Parameter selection
printers must now define the choice of parameters compared to printers and transparent process. The following method is applicable to all models of printers. For large format printers, it is easier to control the amount of ink deposited and allows other approaches.
To choose the print media, we will first seek all support what we feel offers the highest resolution of the printer. Then we'll print a color range of Mr Michael Koch-Schulte with these parameters. 
When printing care should be taken not to change the size of the file and apply a mirror effect.
After each print must take time to observe the drying time. It will not be the same throughout the range but note the drying time is longer. In the method we follow we will use the settings that offer the drying time faster. The choice
The tone color schemes finally dry, it contacts a sheet of sensitized paper to choose tone safelight to UV. It sets the time set earlier by the minimum exposure test.
After exposure, processing and drying of the draw you must select the totally white areas and among those above (if any) to take a tone close to a light gray and not completely surrounded by white points. This choice we avoid having a curve too compressed.
methodology with a model offering a management inking
With large-format plotter models can take any configuration printer that offers the highest print quality. After choosing the Tone is a practical test similar to the practice for printers without ink control. To do this we open a file of gray scale on which we apply the selected tone and it prints all without playing first on the% of inking and printing out completely if you add dry ink, and if Print it out damp down the inking. The goal is to get an impression that only the 100% comes out slightly moist. 
0 comments:
Post a Comment